Specifications are subject to change without notice.
Make sure there is enough clearance at the front and rear of the car.
Yes, you can drive "over" the QuickJack frames (a recommended method), but do NOT drive on top of the frames.
The small air cylinders welded to the sides of the main hydraulic cylinders act like air springs. Because the static weight of the lifting frames is minimal, the air cylinders assist lowering the frames after the vehicle's tires touch the floor, or if the lift was ever raised with no load.
An alternative method, but not quite as appealing would be to attach large springs to the jack frames similar to those used on BendPak’s P-6 low-rise lift as shown here; tolerable on the P-6, but probably not the best option for the lightweight QuickJack.
Inflate each air bottle cylinder to 50-PSI. Be sure to pull the connector off quickly to minimize air loss and don’t forget to replace the dust caps as they help to retain air. The cylinders will require periodic recharging.
Although we have sold thousands of QuickJack’s, with many being used on asphalt, we have yet to hear of one unit sinking or making deep impressions in the asphalt. (We guess asphalt hardness and weather temp would play a role, however).
If you add up the total surface area of the QuickJack bottom frames (the contact patch), it will typically add up to more than the surface area of four tires. In other words, if your car is not sinking in the asphalt, in all likelihood, your QuickJack shouldn’t either.
Be sure to check out our photo gallery. You’ll see the QuickJack being used on many different floor surfaces.
Now if you’re the extra cautious OCD type, heck yea, shoring your QuickJack with plywood underneath sure wouldn’t hurt and you’d even gain a little extra lifting height to boot – a win, win!
All orders destined for countries of European Union will be charged applicable VAT. It can be paid through our distributor / dealer (VAT is 20% of invoice value in Estonia) or paid by customer directly at destination country upon receiving. In this case you would need to provide legit EU VAT payer’s number prior the shipping of goods to you. For all orders destined for countries outside of EU, VAT payment must be taken care of by the receiver. QuickJack or its distributor / dealer is not responsible for unpaid VAT tax and further problems with government authorities. So we encourage you to check and obey your country’s regulations before you shop. If you are tax-exempt customer, you will be required to send us a signed copy of your tax exemption certificate or some other type of proof.
All QuickJack shipments are subject to our standard return policies and associated restocking charges. The customer must retain original cartons and contact our Customer Service Department within 10 days from the date of the invoice before any product is returned to the manufacturer. Special or custom order products of any kind cannot be returned for credit or refund.
It is the customer’s responsibility to check cartons for signs of damage, shortage, or abuse. The customer should open the cartons and check the contents and note any shortages or damages to the freight bill at the time of delivery. It is the customer’s right to refuse any shipment that shows obvious signs of damage or shortage at the time of delivery. If damage is discovered after the delivery driver has left, retain damaged packaging materials and contact our distributor / dealer customer service department at + 372 6971980 or email us at firstname.lastname@example.org
You can check cost of shipping with our European distributor / dealer by visiting their web-site www.bpkeurope.eu or calling +49 152 5566 2676 or email to email@example.com
Orders for accessories or service parts are subject to a per piece freight charge based on package weight and destination zone.
We will designate shipping carriers based on region and/or best service defined by our shipping department. In the event a preferred carrier is requested, you may be responsible for paying an additional freight charges at the time of order.
No, there is no need to make delivery appointment. However we’ll request to have your valid telephone number prior shipment’s dispatch in order for driver to be able to contact you upon arrival to unloading place.
Product information and specifications are available on this website. Additional information is also available by contacting our customer service department at:
+372 6971980 or email us at: firstname.lastname@example.org.
Our commitment to you does not end once you have received your order. Our dedicated team of professionals can assist you in placing your order, tracking your shipment, assist in delivery and installation, fulfilling warranty requirements, and much more. If you run into problems, we have the solutions to ensure your satisfaction. Just call us at:
+49 152 5566 2676 or email us at: email@example.com.
QuickJack is committed to your privacy. We don't share any customer information with third parties. All information gathered by QuickJack about its users is used solely to create a better shopping experience for our customers. For full details visit click here.